The Best Fish Finder GPS Combos Under $500 in 2020 Review And Guide

A GPS fish finder combination would be a welcome addition to any angler’s gear range. When these handy tools are used correctly, you can ensure that each and every minute you spend on the water is put to good use.

Beyond just a pole and a string, the next piece of equipment that I can suggest to anglers looking to take their fishing to the next level is a decent fish finder GPS combo.

They can be great tools not only to maximize your fishing hits but also to train fishermen and expand their understanding of fish behavior as it makes us able to Chart Fishing Hot Spots, GPS Plotting of Bottom Structure, Waypoint Saving because of it 3D Imaging of Bottom Topography.

Transducer of the gadget transforms the electrical pulses to sound signals from the fish finder. Such waves pass down to the bottom surface or on a fish across the depth of the water, and the return echo that the fish finder transducer picks up, which transforms it into electrical impulses.

Such electrical impulses are those that are sent back to the fish finder where they are transformed into symbols or images. The fish finder which have advanced GPS technology, can display the vessel’s location as it travels on water.

So, in order to help you to buy the high performance and cost effective gadget, here we are listing down our picks of best fish finder GPS combo under 500$.

IMAGE PRODUCT Transducer
  • Chirp Sonar Transducer
Check On Amazon
  • Chirp Sonar Transducer
Check On Amazon
  • Splitshot Transducer
  • Transducer
Check On Amazon
  • Chirp Digital Dual Beam
Check On Amazon
  • CV20-TM Transducer
  • transducer
Check On Amazon
  • Dual Beam transducer
Check On Amazon
  • 2D Wide CHIRP, SideScan Sonar
Check On Amazon
  • Traditional, DownVu and CHIRP sonar
  • sonar
Check On Amazon
  • High CHIRP, SideScan and DownScan Imaging sonar
Check On Amazon
  • down imaging, side imaging, and two modes of CHIRP tranducer
Check On Amazon

Garmin Striker 4 with Transducer, 3.5″

The Striker 4 is Garmin’s base fish finder in the Striker line.

A-Scope function allows real-time feedback and you can see fish passing through beam of the transducer. The fish finder uses sophisticated GPS technology which can indicate the vessel’s location as it travels on water.

The monitor is tiny but the color and graphics look pretty good indeed. HVGA isn’t particularly impressive by the standards of today, but you pay more for the stuff behind the computer. And, that is fine.

This cost-friendly tool has a pretty decent temperature sensor feature and logging. That as any angler knows is one of the most critical bits of data available to you. 

If you know fish finders or other software, you should have zero problems. When you fail to set up a telephone or email account, however, there may be some learning curve there. Still, nothing too bad.

This is the Garmin thing. They have vast experience in creating apps user friendly and responsive.

Specs:
Dual-frequency (50/200 khz) sonar capable
Dual-beam (77/200 khz) sonar capable
Frequencies supported: Traditional: 50/77/200 khz
Chirp (mid and high)
Transmit power: 200 w (rms)
Maximum depth: 1,600 ft freshwater, 750 ft saltwater

Pros
  • High-sensitivity GPS
  • CHIRP sonar transducer
  • Fish Symbol ID
  • Adjustable depth line measures
Cons
  • Low pixel count

Final Verdict:

The Garmin Striker 4 is a simple device, very basic. And, this means you don’t have many menu items and apps to work through.

Garmin Striker 4 with Portable Kit

This fish finder can also provide navigational services with its built-in GPS, in addition to helping you track fish. Enabled with these GPS tools, you get access to a high-sensitivity mapping that helps to easily and precisely locate your current location, with the ability to map and save locations where you know fish are also.
Also critical places such as boat ramps, docks, and hurdles can be marked and saved, and shared with other anglers who also use Strikers.
In the package, you can save up to 5000 way points, which is probably more than you’d ever need. This fish finder has a sleek style that is both elegant and user-friendly.
It’s portable and ideal for smaller boat use. The keyboards are large enough to command you even though you wear gloves and are very responsive, too.
Each fish finder ships with a special portable kit that allows you get your fish finder anywhere you want. It comes with a portable bag which protects against the elements.
This package also contains a rechargeable battery, a charger, a suction cup transducer, a swivel or tilt mount and a procedure for handling your transducer cable that is incorporated into the easy-to-manage device.
There are multiple modes from which to choose depending on your ability level when reading fish finders.

Specs:
Dual-frequency (50/200 khz) sonar capable
Dual-beam (77/200 khz) sonar capable
Frequencies supported
Traditional: 50/77/200 khz
Chirp (mid and high)
Transmit power: 200 w (rms)

Pros
  • The backlit screen makes it easier to read even in direct sunlight
  • IPX waterproof.
  • Reliable battery life
  • Easy to mount on any boat, even a kayak.
Cons
  • No Micro SD card reader
  • Low pixel counts on a smaller-sized screen ow pixel count

Final Verdict:

This fish finder has a special feature of Fish ID, which lets you visualize 2D sonar return. Through scrolling to sonar setup, then appearance, and then clicking “turn on fish symbols,” you can enable this function on the sonar screen.

HOOK2 5X – 5-inch

With over 4 decades of experience under their belt, Humminbird knows how to make good quality fishing products. The Lowrance HOOK2 5X Fish Finder has a beautiful 5-inch display and phone like really easy to use menus.
What’s different from the telephone line menus is broader sonar range as well. This that’s double the range seen on the market by other fish finders and makes it very easy for you to find the fish you are searching for.
It’s very easy to set up this fish finder as it can be conveniently placed on a transom, trolling motor or even within a hull. This product is provided to your CHIRP sonar and DownScan sonar by the SplitShot transducer which are useful while fishing.
While thanks to the GPS plotter, the navigation system is simple on the road, you can use it with ease. It lets you do things like finding your bearings, following trails and even adding waypoints but the only drawback is that there are no maps included.

Specs:
Display: 5″ (127mm)
Operating Frequency: 200 kHz Wide Cone , 455/800 kHz
Warranty: Three years
Transducer Type: SplitShot 
Waterproof Standard/rating: IPx7

Pros
  • Easy to use Phone like menus
  • Easy product to install
  • Comes with a SplitShot transducer
  • Have a split-screen feature
Cons
  • Does not include any maps
  • No micro sd expansion slot

Final Verdict:

The Lowrance HOOK2 is by far the easiest to use fishfinder GPS combo unit in our picks. It’s a beginner-friendly which comes with TripleShot Transducer, phone-like menus, and auto-tuning sonar system.

Humminbird 410210-1 HELIX 5 CHIRP

With the strong combo of switch fire, down imaging and side imaging Sonar, the Helix 5 has been able to remain ahead of the competition and receive a lot of positive feedback.
For anglers who are searching for a Fishfinder that has all the sonar features, this particular product is the best option for you.
The Gen 2 fishfinder stood out, unlike previous models, by incorporating a CHIRP sonar system that can search depth of the water up to 1000 feet, either using low, medium or high frequency modes. This fishfinder’s design is solid, amazing and at every corner shouts of high quality. The Clear Mode gives us the strongest target, even at the seabed.
After all sources of clutter have dissipated. With the Max Mode, we can see more fish compared to the Clear Mode, which can only detect large targets (fish).
The G2 also lets you take snapshots of your image while keeping the mark button for a long time.

Specs:
Sonar-Standard: CHIRP Digital Sonar, DualBeam PLUS
Sonar-Frequencies Supported: 50/83/200 kHz
Display Type: Color TFT
Temperature: Built In
Temperature Alarm: Yes

Pros
  • GPS and Fish sonar combo
  • CHIRP and transducer technology
  • Screenshot function
  • Waterproof rating of IPX7
Cons
  • No standing mode for saving battery life

Final Verdict:

So, if you’re looking for a Fishfinder that has all the great GPS and mapping features at a fair price point, then we highly suggest this particular Fishfinder

Garmin Striker 4cv with Transducer

The STRIKER Plus 4cv fishfinder with a bright 4.3 “monitor and built-in GPS includes conventional Garmin CHIRP sonar, Garmin CHIRP ClearVüTM sonar scanning software and Quickdraw Contours map mapping software, which saves up to 2 million acres of data with 1′ contours. The built-in GPS helps you to map and navigate to way points and displays the pace of your boat.
You can see the structure clearly, the objects submerged and the fish. Paired with conventional Garmin CHIRP sonar for impressive separation of targets, this transducer lets you capture more fish.
The highly sensitive, built-in GPS finds and retains your location wherever you go on shore. The GPS lets you mark your way points for various locations. So, if the fish bit in 1 spot, you can mark it, and come back to it on your next ride. Label docks, boat ramps and other places on the shore, and build routes for your next trip back to them.

Specs:
CHIRP (mid and high): ClearVu 260/455/800
Maximum Depth: 400 Feet
Resolution: 480 x 272
Sonar : CHIRPClearVu
Specific Transducer :CV20-TM Transducer
Transmit Power :300 Watt

Pros
  • CHIRP ClearVü Clarity
  • Traditional: 50/77/200 kHz
  • CHIRP
  • CV20-TM Transducer
Cons
  • Too much sensitive, must be handled carefully

Final Verdict:

The STRIKER Plus 4cv fishfinder features Garmin CHIRP technology in conjunction with Garmin ClearVüTM scanning sonar for an almost photographic, wide picture of what’s going on underneath your boat.

Garmin Striker Plus 4 with Dual-Beam transducer

Looks doesn’t matter when it comes to fishfinders but Garmin Striker Plus 4’s matte finished body will certainly draw your attention to it. Garmin built the Striker Plus with high-duty military standard stuff that makes it versatile in any conditions.
It weights approximately 318 grams with measurements of 3.9 x 1.8 x 6.9. In addition, this little marvel features a wide monitor of 4’3 “inches. Nevertheless, the Striker Plus unit’s most significant feature is the addition of its dual beam transducer.
You can draw and also save contour maps as you move across locations you are fishing for. Just go into the “Quickdraw Contours” option and then choose “Start Recording.”
The finder comes with dual beam transducer including a chirp technology that enables the output of crystal-clear and very high-resolution sonar images of target separation. This tech also provides higher highly precise mapping of the bottom of the sea.

Specs:
Dual-frequency (50/200 khz) sonar capable
Dual-beam (77/200 khz) sonar capable
Frequencies supported: traditional: 50/77/83/200 khz
Split-screen zoom
Water temperature sensor included

Pros
  • Large display of 4.3 inches
  • GPS navigation system
  • Garmin Quickdraw Contours Mapping
  • Built-in dual beam transducer which provides high definition images
Cons
  • Doesn’t come with an NMEA port

Final Verdict:

The finder comes with dual beam transducer including a chirp technology that enables the output of crystal-clear and very high-resolution sonar images of target separation.

Lowrance Hook2-5 with TripleShot Transducer

The HOOK2-5 with TripleShot transducer is one of the most interesting devices for the average Angler. It is capable of measuring and plotting 2D Broadband CHIRP, DownScan, SideScan and the US Inland.
The HOOK2-5 TS includes a 5′′ monitor on an 800H x 480W pixel high resolution display. SolarMax LED backlighting and WVGA TFT color offer a vivid, transparent picture at any level of light. You can change the angle at 50 or 70 degrees from side to side, or from top to bottom.
A small keyboard to the right side of the screen allows you to easily access all menus with minimal one-touch effort and use any app. The split screen view lets you simultaneously see up to three screens.
The features of the TripleShot transducer and sonar have many advantages over previous HOOK systems, and incorporating some excellent SideScan sonar is at the top of the list.
It is mainly constructed from smaller boats for lake or coastal fishing but has extensible charting. What it was intended to do does well, with quick notifications and simple pictures. For a 5′′ package that does all the Lowrance HOOK2-5 TripleShot can do, it’s also very reasonably priced.

Specs:
Mount Type: Quick Disconnect
Includes GPS: Yes
Side Imaging: Yes
Screen Size (in.): 5
Preloaded maps: Yes

Pros
  • Accurate GPS location
  • 2D Wide CHIRP, SideScan Sonar
  • TripleShot transducer
  • Over 3,000 U.S. inland maps
Cons
  • Does not support external AIS or GPS units

Final Verdict:

The HOOK2-5 with TripleShot transducer is one of the most interesting devices for the average Angler.

Garmin STRIKER 5cv

The STRIKER 5cv is not the most powerful unit on the market, but it’s a really capable fish finder that deserve serious but budget-limited anglers to consider.
The Garmin STRIKER 5cv offers users a range of useful features to help you find more fish and capture them.
While the primary purpose of a fish finder is to locate and report information about the underwater world, in combo with geographic data, you will want to use this information to improve your ability to find and capture the fish.
By emitting a wide spectrum of frequencies rather than a single frequency signal, CHIRP technology produces more accurate images than traditional sonar systems do.
It also features a versatile sonar scanning module that Garmin calls ClearVu. The Garmin STRIKER 5cv with ClearVu sonar technology allows you to see almost photographic quality images of the underwater environment.

Specs:
500-Watt RMS power
Fish Symbol ID to quickly identify targets
Dual-beam (77/200 kHz) and dual-frequency (50/200 kHz) capable
Water temperature sensor
Bottom lock feature
Split-screen zoom capabilities

Pros
  • High-quality 5-inch display screen
  • Traditional, DownVu and CHIRP sonar technologies
  • IPX7 water resistance
Cons
  • Does not have chart-plotting capabilities. 

Final Verdict:

The STRIKER 5cv is not the most powerful unit on the market, but it’s a really capable fish finder that deserve serious but budget-limited anglers to consider.

The Lowrance Hook2 7x

The Lowrance Hook 7 is a well-made fishfinder and map plotter, for accurate results in fish finding and map plotting. It provides demonstrated features at an amazing value, without losing the consistency that Lowrance fishermen have come to expect.
The advantages of this unit from CHIRP Sonar and DownScan Imaging will give you a full and clear overview of the underwater or underboard environment.
It has a 7-inch 16-bit LED backlit Full-Color VGA SolarMax Plus TFT display with a bright resolution of 800480. Despite that being said, in the case of full sunshine, the pictures on the screen are easy to see and, furthermore, can be seen from large angles.
In addition, this device offers convenient page selector menu that allows fast access to all apps with easy one-thumb operation.
This has one of the most precise, built-in GPS antenna, equipped with a detailed U.S. map including more than 3000 lakes and rivers, as well as coastal contours up to 1000 feet, and also includes Navionics+ mapping for more extensive, transparent and interactive coverage.
This model also comes with the Basemaps and HDI Skimmer transducer.

Specs:
Available in five screen sizes: 4”, 5”, 7”, 9” and 12”
High-resolution, SolarMAX display
Autotuning sonar
Double the CHIRP sonar coverage of most fishfinders
Broadband Sounder, High CHIRP, SideScan and DownScan Imaging™ sonar options

Pros
  • Powerful 2D CHIRP Sonar
  • 7-inch screen
  • GPS Alarms
  • DownScan Overlay
Cons
  • May take a while to master it completely

Final Verdict:

It includes improved sonar sensitivity, exceptionally good separation of targets and a higher rejection of noise, making it more accurate and simpler to use.

Humminbird 410940-1 HELIX 7 CHIRP MDI (MEGA Down Imaging) GPS G3

Another from Humminbird and as the name indicates, Helix 7 sports a 800×480 resolution TFT 7 “widescreen display.This is also Humminbird’s newest iteration (3rd generation), It is considerably more expensive, but it also provides some new technology and features.
For example, with CHIRP sonar, the Helix 7 Gen 3 features both side imagery and downimagery. There are two CHIRP modes, too: wide mode for optimum coverage on deep waters, and narrower mode for greater visibility and depth. In short, an incredibly flexible unit.
Helix 7 Chirp MDI GPS G3 NAV+ features built-in Down Mapping, Dual Spectrum Chirp Sonar, AutoChart Live, GPS, and Basemap Humminbird. The 7 “ultra wide screen gives you ample space for viewing the many choices for preloading split screen views.

Specs:
Power Source: Battery
Frequency: 50/83/200/455 kHz
Max Sonar Depth: 1,200 ft (standard transducer); 3,500 ft (optional 50 kHz)
Transconducer Type: Transom
Wattage: 4000 W

Pros
  • Very versatile with down imaging, side imaging, and two modes of CHIRP
  • MicroSD slot for extra memory
  • Mounting hardware included
  • Can reach up to 1,500 feet in depth
Cons
  • No Wi-Fi connectivity

Final Verdict:

This unit comprises a Navionics+ map card with data for more than 21,000 lakes in the US and Canada. Amazing, isn’t it.

Tips to buy:

Fishfinder is a vital part of any angler ‘s arsenal and a large range is available. To simplify this phase we will look at five attributes of the GPS combination of fishfinder to figure out which one is the right one for you.

Combo or Stand Alone:
The first question you should ask is if you want your fish finder to be combined with or without a GPS map plotter?
It is very useful to have GPS navigation, especially on a smaller boat when combining these two functions on one display.


Screen Size:
The second question you want to know is how large a screen is? It is much bigger, because you obviously have to increase the budget if you want to have a bigger screen. The dimensions of the screen range from a 3.5-inch small to a 7-inch or even larger monitor.


Power:
This is a very important attribute. The power of such equipment is expressed in RMS watts. The smaller fish finders can have as little as 100 RMS watts whereas the bigger ones can have as much as a thousand watts.


Frequency:
There are several models that give a difference in frequency or so. Things like 50 or 200 kHz. They’ll have something. In shallow water, higher frequencies are generally better, and lower frequencies perform well.

Conclusion:

Choosing a best fish finder under $500 transducer can be a bit tough, especially if you have not done it before, but, if you even slightly brief yourself with what a good transducer must have then you will not have any issue. Therefore, remember that a good transducer must have stable and sturdy mounting plus it must have good beam width as well as frequency because it will determine how well the signal will bounce.

Q&As:

Is chirp better than sonar?

A conventional sonar transmits about 1% of the time, but CHIRP sonars transmit ascending pulses, which are 10 times longer. They are adding significantly more energy, ten- to fifty times more than traditional fishfinders, although CHIRP devices frequently transmit less energy at the peak.

Is side imaging better than down imaging?

Fish founders with a transducer showing down sonar waves under your boat, while fish finders with a side picture are aiming their beams toward your boat’s sides. Both forms are inherently better than others, and both can help you find more fish (and thus catch).

Is Garmin better than Lowrance?

In the low price range, Lowrance has several more options. The cheaper versions also have premium features that popularize them with anyone interested in pricing. Garmn provides excellent price in the center of the country but they are much expensive.